The Model TC1 Temporary Cone Strainer can be used in steam, water, oil or gas service, and are installed between two flanges for quick protection of equipment. They can be constructed of carbon steel or stainless steel, and are used either temporarily, or where cost is of prime importance. The pipe must be disassembled to inspect, clean, or remove these strainers.
Unless otherwise specified, a 1/8" perforated 304 stainless steel screen will be supplied, but different size perforations and meshes are available in stainless steel, monel, and brass.
See the submittal sheet for additional standard technical data.
swipe to see more products
| MODEL |
SIZE
(in)
|
LENGTH
(in)
|
CLASS |
A
(in)
|
B
(in)
|
ITEM NO |
|---|---|---|---|---|---|---|
| TC1 | 1-1/2 | 4 | 150 | 3-1/4 | 1-1/4 | TC10150 |
| TC2 | 1-1/2 | 4 | 300 | 3-1/4 | 1-1/4 | TC20150 |
| TC3 | 1-1/2 | 4 | 600 | 3-5/8 | 1-1/4 | TC30150 |
| TC1 | 2 | 6 | 150 | 4 | 1-3/4 | TC10200 |
| TC2 | 2 | 6 | 300 | 4 | 1-3/4 | TC20200 |
| TC3 | 2 | 6 | 600 | 4-1/4 | 1-3/4 | TC30200 |
| TC1 | 2-1/2 | 6-1/4 | 150 | 4-3/4 | 2-1/4 | TC10250 |
| TC2 | 2-1/2 | 6-1/4 | 300 | 4-3/4 | 2-1/4 | TC20250 |
| TC3 | 2-1/2 | 6-1/4 | 600 | 5 | 2-1/4 | TC30250 |
| TC1 | 3 | 6-3/4 | 150 | 5-1/4 | 2-3/4 | TC10300 |
| TC2 | 3 | 6-3/4 | 300 | 5-1/4 | 2-3/4 | TC20300 |
| TC3 | 3 | 6-3/4 | 600 | 5-3/4 | 2-3/4 | TC30300 |
| TC1 | 4 | 10 | 150 | 6-3/4 | 3-3/4 | TC10400 |
| TC2 | 4 | 10 | 300 | 6-3/4 | 3-3/4 | TC20400 |
| TC3 | 4 | 10 | 600 | 7-1/2 | 3-3/4 | TC30400 |
| TC1 | 6 | 13 | 150 | 8-5/8 | 5-3/8 | TC10600 |
| TC2 | 6 | 13 | 300 | 8-5/8 | 5-3/8 | TC20600 |
| TC3 | 6 | 13 | 600 | 10-3/8 | 5-3/8 | TC30600 |
| TC1 | 8 | 17 | 150 | 10-7/8 | 7-3/8 | TC10800 |
| TC2 | 8 | 17 | 300 | 10-7/8 | 7-3/8 | TC20800 |
| TC3 | 8 | 17 | 600 | 12-1/2 | 7-3/8 | TC30800 |
| TC1 | 10 | 22 | 150 | 13-1/4 | 9-3/8 | TC11000 |
| TC2 | 10 | 22 | 300 | 13-1/4 | 9-3/8 | TC21000 |
| TC3 | 10 | 22 | 600 | 15-5/8 | 9-3/8 | TC31000 |
| TC1 | 12 | 26 | 150 | 16 | 11 | TC11200 |
| TC2 | 12 | 26 | 300 | 16 | 11 | TC21200 |
| TC3 | 12 | 26 | 600 | 17-7/8 | 11 | TC31200 |
| TC1 | 14 | 27 | 150 | 17-3/8 | 12-1/4 | TC11400 |
| TC2 | 14 | 27 | 300 | 17-3/8 | 12-1/4 | TC21400 |
| TC3 | 14 | 27 | 600 | 19 | 12-1/4 | TC31400 |
| TC1 | 16 | 30 | 150 | 20-1/8 | 14 | TC11600 |
| TC2 | 16 | 30 | 300 | 20-1/8 | 14 | TC21600 |
| TC3 | 16 | 30 | 600 | 21-7/8 | 14 | TC31600 |
| TC1 | 18 | 35 | 150 | 21-1/4 | 15-3/4 | TC11800 |
| TC2 | 18 | 35 | 300 | 21-1/4 | 15-3/4 | TC21800 |
| TC3 | 18 | 35 | 600 | 23-3/4 | 15-3/4 | TC31800 |
| TC1 | 20 | 39 | 150 | 23-1/2 | 17-1/2 | TC12000 |
| TC2 | 20 | 39 | 300 | 23-1/2 | 17-1/2 | TC22000 |
| TC3 | 20 | 39 | 600 | 26-5/8 | 17-1/2 | TC32000 |
| TC1 | 24 | 45 | 150 | 27-7/8 | 21-1/4 | TC12400 |
| TC2 | 24 | 45 | 300 | 27-7/8 | 21-1/4 | TC20400 |
| TC3 | 24 | 45 | 600 | 30-7/8 | 21-1/4 | TC32400 |